Zalman ZM1000-HP is an ultra-quiet power supply that complies with ATX12V Version 2.2, and supports the latest dual-core CPUs(Intel Core2 series/AMD
Athlon64-X2 series), as well as the latest dual graphic card systems(NVIDIA® SLI®-Ready Certified).
Zalman ZM 1000-HP 1000 Watt Quiet Power Supply
Dual Heatpipes Installed for Maximum Cooling Performance and Ultra-Quiet Operation
Dual heatpipes with ultra-high cooling performance incorporated on the main heat sources enable high load operation even at low fan RPM for a dramatic
reduction in noise levels.
Module Sleeved Cables
Modular cables provide organized cable management and improved air circulation inside the computer case.
All power cables are sleeved for easy cable management and improved air circulation inside the
Ultra Quiet 140mm Fan
The ultra quiet 2 ball-bearing 140mm fan maximizes the airflow and minimizes the noise level enabling a noiseless computing environment with optimized
Standby Noise Filter Switch
The 5Vsb Noise Filter eliminates high frequency noise in standby mode.
* The Standby Noise Filter Switch is NOT a power switch. The AC Power Cord MUST be unplugged in order to turn the power supply OFF.
Six Independent +12VDC Outputs
Six +12VDC rails supply power independently to the CPU, VGA, motherboard, and peripheral components for the highest level of stability and performance.
Four PCI Express VGA Power 6-Pin & 6+2 Pin Connectors
Four independent 6-Pin Power Connectors (two 6-pin & two 6+2 pin) provide support for Nvidia’s Quad SLI.
Improved Power Factor & Reduced Harmonics through Active PFC
By implementing Active PFC(Power Factor Correction), the Power Factor (PF) is improved up to 99% while harmful harmonic frequencies are reduced to meet
the Line Harmonic Distortion Requirement of IEC61000-3-2 Class D Specification.
High Efficiency Design and 80 PLUS Certified
This power supply is capable of reaching a maximum of 86% efficiency (230VAC, Full & Typical Load) through its use of high switching frequency and low
power-loss circuitry. This product has been certified with the 80 PLUS Power Supply Certification and guarantees a higher efficiency compared to uncertified
* 80 PLUS is an innovative, electric utility-funded incentive program that strives to integrate more energyefficient power supplies into desktop computers and
EZ Grip Connectors for ODDs & HDDs
EZ Grip Connectors for easy removal of the plugs from ODDs & HDDs.
Supports ATX12V CPU 4-Pin and EPS12V CPU 8-Pin
Two ATX12V CPU 2 2 (4-Pin) power cables can be combined to form an EPS12V CPU 8-Pin power cable.
Gold-Plated Terminals & 16AWG Wires
All connector terminals are gold-plated to minimize contact resistance and power lose.
16AWG (thicker than 18AWG) wires are incorporated to minimize voltage drop during high load operation.
Multiple Safety Features
Over-Voltage Protection, Over-Current Protection, Short-Circuit Protection, Under-Voltage Protection, Over-Temperature Protection.
WEEE & RoHS
Complies with WEEE & RoHS environmental directives of the European Union.
- WEEE (Waste Electrical and Electronic Equipment)
- RoHS (Restriction of Hazardous Substances)
International Safety and EMC Certifications
This power supply is capable of reaching a maximum of 86% efficiency (230VAC, Full & Typical
Load) through its use of high switching frequency and low power-loss circuitry. This product has
been certified with the 80 PLUS Power Supply Certification and guarantees a higher efficiency
compared to uncertified products.
* 80 PLUS is an innovative, electric utility-funded incentive program that strives to integrate
more energyefficient power supplies into desktop computers and servers.
Output Power Cable Specifications
[Cable Types and Functions]
Electrical & Physical Characteristics
AC Input Range
115VAC ~ 240VAC ±10% DC Output
Frequency 47Hz~63Hz ZM1000-HP
AC Input Current
(Rated) 115VAC 15A Output V. Output Load
230VAC 8A Imin Imax Ipeak
PFC Type Active PFC +3.3V 0.8A 40A 45A 250W 1000
Power Factor 99% Maximum
+5V 0.5A 40A 45A
Limit (@ Cold start at 25°C) 115VAC 80A
+12V1 0.5A 18A 22A 960W
230VAC 100A +12V2 0.5A 18A 22A
Efficiency 86% Maximum @230VAC, Full&Typical load
+12V3 0.5A 28A 30A
Output V. Regulation Range
Load +12V4 0.5A 28A 30A
+3.3V ±5% +3.14V~+3.47V
+12V5 0.5A 18A 22A
+5V ±5% +4.75V~+5.25V +12V6 0.5A 18A 22A
+12V1 ±5% +11.4V~+12.6V -12V 0.0A 0.8A 27.1W
+12V2 ±5% +11.4V~+12.6V +5VSB
0.1A 3.5A 4.0A
+12V3 ±5% +11.4V~+12.6V Protection Features
+12V4 ±5% +11.4V~+12.6V Over Voltage
+12V5 ±5% +11.4V~+12.6V Over Current
+12V6 ±5% +11.4V~+12.6V Short Circuit
-12V ±10% -10.8V~-13V Over Temperature
+5VSB ±5% +4.75V~+5.25V Under Voltage
& Noise Output V. Specification At Full
Load Ambient Temperature
+3.3V 50mV Operation 0°C ~ +45°C
+5V 50mV Storage -20°C ~ +60°C
+12V1&2 120mV Ambient Humidily
+12V3&4 120mV Operation 5%RH ~ 95%RH
+12V5&6 120mV Storage 5%RH ~ 95%RH
-12V 120mV Dimensions
+5VSB 50mV 210(L) X 150(W) X 86(H) mm
[Dual-Connector (ZM-DC1) Components]
[Energy Efficient Green Power 80 PLUS Certified]