Zalman ZM-MFC3 Fan Speed Controller
Zalman ZM-MFC3 Fan Speed Controller - Cooling Fan Regulator
Product Details - Zalman ZM-MFC3 Fan Speed Controller Fan Speed Regulator
The Zalman ZM-MFC3 fan speed controller uses a real time power load display unit to keep you fully updated on your computers current statistics. The Zalman
ZM-MFC3 uses a FSTN display for wide viewing angles allowing the display to always be clear even.
The ZM-MFC3 has the capacity for temperature monitoring of up to 4 components of your choice. The display shows: Fan RPM monitoring & control (3 x voltage,
1 x PWM), timer display and a built-in protection circuit & alarm.
Zalman ZM-MFC3 Front Panel
Zalman ZM-MFC3 real time fan speed controller.
1.Power Load Meter: Displays Power Load between 10 ~ 999W. Readings of 1 ~ 9W are shown as "Lo" and readings of 1000W+ are shown as "Hi".
2.Timer: Timer shows Computer usage time and resets when Computer is turned OFF.
3.RPM Display: RPM is displayed in units of 10RPM. Values of 200RPM and below are shown as "0". Values between 201 ~ 6000RPM are supported by the
4.Temperature Display: Displays temperatures between -9°C and 99C. Temperatures below -10°C are shown as "Lo". The Display will blink temperatures
between 80 ~ 99.9°C and display "Hi" for temperatures above 99.9°C.
5.Fan Channel Display.
6.Jog Wheel: Jog Wheel is used for adjusting Fan RPM and selecting a Fan Channel. RPM can be set from 60 to 6000RPM in units of 60RPM.
Zalman ZM-MFC3 Back
Zalman ZM-MFC3 real time fan speed controller panel back.
1.Standard Fans (Fan 1~3): 3-Pin fans that support the RPM output function can be connected for use. PWM Fan : A 4-Pin fan that supports the PWM function
can be connected for use.
2.Temperature Sensor: Four temperature sensors can be connected.
3.CVS Terminal: Receives the measured values of the CVS.
4.Power Connector: Connects with the PSU's 4-Pin connector.
Fan Controller Components
Fan Speed Controller Specifications:
Zalman ZM-MFC3 Fan Controller Specifications:
- Dimensions 147(L) x 87(W) x 42(H) mm
- Power & Temperature Display 10~999W/ -9.9 °C ~ +99.9 °C
- Fan Compatibility 1 x 4-Pin(Supports fans with PWM function)
- 3 x 3-Pin(Supports fans with RPM output function)
- Fan RPM Control PWM Regulation Method (Fan PWM)
- Voltage Control Method (Fan No.1~3)
- Output Current MAX 0.7A
- Output Voltage +4~11VDC
- Input Voltage +12VDC/+5VDC
Fan Controller Components
•One CVS (Ampere/Voltage Sensor)
•One CVS Extension Bracket
•One Temperature Sensors
•One C3 Cable
•One Y Cable
•One 4-Pin Cable
•One 3-Pin Cable
•One Bracket Screw
•Four ZM-MFC3 Installation Screw
•One User's Manual
Fan Speed Regulator Reviews
Zalman Fan Speed Controller Reviews. A video review is available from metacafe.com.