Zalman CNPS9500-AM2 AMD Aero Flower Cooler, ( Material Pure Copper ) , AM2/939/754
AMD Quiet CPU Cooler
Features a silver powder coating and green LED fan made specially for the the new AMD AM2 CPU ...
For Sockets AM2, 754, 939 and 940
This is a complete AMD CPU COOLING SOLUTION !
First there was the CNPS9500-LED and what success that has proved to be! Then the CNPS9500-AT for Intel only graced our shop. Now Zalman have
introduced a new version of this excellent cooler, the CNPS9500-AM2. Performance-wise, this cooler works in exactly the same way as the CNPS9500-LED. It is
supplied with a standard 3-pin fan cable and a FANMATE2 to allow you to control the fan speed.
The most striking difference between the other cpu cooling fan versions and this new AM2 cooler is the finish of the product. The CNPS9500-AM2 has been given
a makeover. Instead of the plain copper look it has been nickel plated which gives it a more sophisticated look and feel. In addition, the opaque fan has a green
LED, which is great if you like to show off your internal components.
The reason Zalman have used the "AM2" suffix is because this CNPS95000 is compatible with AMD’s new AM2 socket. As usual, Zalman have released a
comprehensive list of compatible motherboards. Please follow these links depending on your motherboard socket type: Socket AM2 and Socket S754/939/940. If
your motherboard is not shown on these pages then please measure your motherboard to ascertain compatibility. See Installation Requirements on this page for
The new mounting clip has been designed to make it possible to install this cooler onto any AM2, 754, 939 or 940 motherboard without having to remove it from
the chassis, which is not possible with the CNPS9500-LED version.
Specifically designed for AMD’s new AM2 socket and also fits 939/754
Ultra-quiet opaque fan with green LED
Recommended by nVidia for nForce
All other features and benefits are the same as CNPS9500-LED
CPU Compatibility Socket AM2, 754, 939 and 940
CPU supported clock speeds All speeds
Heatsink dimensions, mm 85(L) x 112(W) x 125(H)
Materials Pure copper
Dissipation surface area 3,698 sq.cm
Fan dimensions 92 x 92 x 25 mm
Thermal resistance 0.12 - 0.16°C/W *
Rotational speed 1350 - 2650 rpm *
Fan illumination Green
Fan Controller FANMATE2
Acoustic noise level 18.0 - 27.5 dBA *
Compatible CPUs and Motherboards
Socket CPU Silent Mode
(1,350~1,800rpm) Low-noise Mode
AMD AM2 Sempron Supports all speeds Supports all speeds
Athlon 64 X2
Athlon 64 FX-62
754 Sempron Supports all speeds Supports all speeds
939 Athlon 64
Athlon 64 X2
940 Athlon 64 FX
Dimensions 85(L) X 112(W) X 125(H)mm
Material Pure Copper
Dissipation Area 3,698cm2
Thermal Resistance Silent Mode 0.16 ¡ÆC/W Low-noise Mode 0.12 ¡ÆC/W
Bearing Type 2-Ball Bearing
Speed Silent Mode 1,350rpm¡¾ 10 % Low-noise Mode 2,600rpmM ¡¾ 10 %
Noise Level Silent Mode 18.0dB ¡¾ 10% Low-noise Mode 27.5dB ¡¾ 10%
FAN Speed Controller (FAN MATE 2)
- Dimensions : 70(L) x 26(W) x 26(H)mm
- Weight : 20g
- Output Voltage : 5V ~ 11V ¡¾ 2%
- Allowable Power : 6W or lower
- Connector : 3-Pin
1. Compatible with AMD Opteron, Athlon 64 X2 Dual-Core, Athlon 64 FX, Athlon 64, and Sempron for
2. Pure copper heatsink with component layout optimized for maximum cooling efficiency.
3. Innovative, patented, and curved heatpipe design for a heat transfer capacity of up to six heatpipes
with the use of just three.
4. Ultra slim fins (0.2mm) for minimized weight and reduced airflow resistance.
5. Adjustable fan speed controller (FAN MATE 2) included.
Cases equipped with an Air Guide must have their Air Guide Ducts removed before installation.
Install only on systems meeting the following conditions :
1) There must be no interfering components (e.g. PSU, VGA card) within 56mm distance from the
center of the CPU.
2) There must be no interfering components (e.g. ODD) within 45mm distance from the center of the
3) Case chassis cover must be distanced at least 135mm away from the motherboard.
1) CNPS9500 AM2
2) Thermal Grease
3) FAN MATE 2 (Fan Speed Controller)
4) Cable for FAN MATE2
5) Double-sided Tape(to attach FAN MATE2)
6) One(1) Clip
7) One(1) Lever
8) User¡¯s Manual