Introducing the Zalman CNPS8000 Quiet yet powerfull low profile CPU Cooler With 92mm buried frame Fan
Desighn
Compatible CPUs
Socket CPU Silent Mode
(1,350~1,800rpm) Low-noise Mode
(1,800~2,600rpm)
Intel 775 Pentium 4 Prescott Supports all speeds Supports all speeds
Pentium D
Celeron D
AMD 754 Sempron Supports all speeds Supports all speeds
Athlon 64
939 Athlon 64
Athlon 64 X2
940 Athlon 64 FX
Opteron
Specifications
Heatsink
Dimensions 108(L) X 108(W) X 62.5(H)mm
Weight 350g
Material Pure Copper and Pure Aluminum
Dissipation Area 2,815cm2
Thermal Resistance Silent Mode 0.13 °C/W Low-noise Mode 0.2 °C/W
Fan
Bearing Type 2-Ball Bearing
Speed Silent Mode 1,400rpm± 10 % Low-noise Mode 2,600rpm± 10 %
Noise Level Silent Mode 18.0dBA ± 10% Low-noise Mode 30.0dBA ± 10%
FAN Speed Controller (FAN MATE 2)
- Dimensions : 70(L) x 26(W) x 26(H)mm
- Weight : 20g
- Output Voltage : 5V ~ 11V ± 2%
- Allowable Power : 6W or lower
- Connector : 3-Pin
※ Directions for Use
1. Compatible with Slim and Low Profile Computer Enclosures.
2. Noiseless and vibration-free operation in Silent Mode.
3. Optimum performance and quick heat dispersion achieved with the use of 4 heatpipes.
4. Optimized fin design for lightness and higher performance.
5. Ultra quiet 92mm fan.
6. Compatible with Intel Pentium D (Socket 775), Intel Pentium 4 (Socket 775),
AMD Athlon 64 X2 (Socket 939), and AMD Sempron/AMD64 (Socket 754/939/940).
7. FAN MATE 2 included for manual adjustment of fan speed.
Installation Requirements
Common Components
1) One CNPS8000
2) One Thermal Grease
3) One FAN MATE 2 (Fan Speed Controller)
4) One Cable for FAN MATE 2
5) One Double-sided Tape
(for attaching FAN MATE 2)
6) One User’s Manual Components for Intel Pentium D
/Pentium 4 (Socket 775)
7) Two Clips for Socket 775
8) One Backplate for Socket 775
Components for AMD AMD64
(Socket 754/939/940)
9) One Clip-A for AMD64
10) One Clip-B for AMD64
Desighn
Compatible CPUs
Socket CPU Silent Mode
(1,350~1,800rpm) Low-noise Mode
(1,800~2,600rpm)
Intel 775 Pentium 4 Prescott Supports all speeds Supports all speeds
Pentium D
Celeron D
AMD 754 Sempron Supports all speeds Supports all speeds
Athlon 64
939 Athlon 64
Athlon 64 X2
940 Athlon 64 FX
Opteron
Specifications
Heatsink
Dimensions 108(L) X 108(W) X 62.5(H)mm
Weight 350g
Material Pure Copper and Pure Aluminum
Dissipation Area 2,815cm2
Thermal Resistance Silent Mode 0.13 °C/W Low-noise Mode 0.2 °C/W
Fan
Bearing Type 2-Ball Bearing
Speed Silent Mode 1,400rpm± 10 % Low-noise Mode 2,600rpm± 10 %
Noise Level Silent Mode 18.0dBA ± 10% Low-noise Mode 30.0dBA ± 10%
FAN Speed Controller (FAN MATE 2)
- Dimensions : 70(L) x 26(W) x 26(H)mm
- Weight : 20g
- Output Voltage : 5V ~ 11V ± 2%
- Allowable Power : 6W or lower
- Connector : 3-Pin
※ Directions for Use
1. Compatible with Slim and Low Profile Computer Enclosures.
2. Noiseless and vibration-free operation in Silent Mode.
3. Optimum performance and quick heat dispersion achieved with the use of 4 heatpipes.
4. Optimized fin design for lightness and higher performance.
5. Ultra quiet 92mm fan.
6. Compatible with Intel Pentium D (Socket 775), Intel Pentium 4 (Socket 775),
AMD Athlon 64 X2 (Socket 939), and AMD Sempron/AMD64 (Socket 754/939/940).
7. FAN MATE 2 included for manual adjustment of fan speed.
Installation Requirements
Common Components
1) One CNPS8000
2) One Thermal Grease
3) One FAN MATE 2 (Fan Speed Controller)
4) One Cable for FAN MATE 2
5) One Double-sided Tape
(for attaching FAN MATE 2)
6) One User’s Manual Components for Intel Pentium D
/Pentium 4 (Socket 775)
7) Two Clips for Socket 775
8) One Backplate for Socket 775
Components for AMD AMD64
(Socket 754/939/940)
9) One Clip-A for AMD64
10) One Clip-B for AMD64
Zalman CNPS8000 Quiet yet powerfull low profile CPU Cooler
Product order page - Order button located below
