Zalman Quiet Power Supply ZM600-HP Heatpipe Cooled Modular Computer PSU
ZM600-HP is ultra-quiet power supply complies with ATX12V Version 2.2, and supports the lastest dual-core CPUs(Intel Core2 series/AMD Athlon64-X2 series),
as well as the lastest dual graphic card systems(SLI).
Heatpipe Installed for Maximum Cooling Performance and Ultra-Quiet Operation
A heatpipe with ultra-high cooling performance incorporated on the power supply’s main
rectifiers enables high load operation even at low RPM for a dramatic reduction in noise levels.
Improved Power Factor & Reduced Harmonics through Active PFC
By implementing Active PFC(Power Factor Correction), the Power Factor (PF) is improved from 75% (Passive PFC) up to 99% while harmful harmonic
frequencies are reduced to meet the line harmonic distortion requirements of IEC61000-3-2 Class D.
High Efficiency Design
This power supply is capable of reaching a maximum of 84% efficiency(230VAC, Full & Typical Load) through its use of high switching frequency and low
ATX20+4 Pin Main Connector
ATX20+4 pin main connector broadens the range of motherboard compatibility.
Supports ATX12V CPU 4-Pin and EPS12V CPU 8-Pin
Two ATX12V CPU 2ⅹ2(4-Pin) power cables can be combined to form an EPS12V CPU
8-Pin power cable.
Dual PCI Express VGA Power 6-Pin Connector
Support Nvidia SLi dual graphic card systems.
Modular cables provide organized cable management and improved air circulation inside the computer case.
Ultra Quiet Panaflow NMB-MAT 120mm RoHS Fan
Ultra quiet 2-Ball Bearing 120mm fan maximizes the airflow and minimizes the noise level enabling a noiseless computing environment with optimized cooling.
Four Independent +12VDC Outputs
Four +12VDC rails supply power independently to the CPU, VGA, motherboard, and peripheral
components for the highest level of stability and performance.
EZ Grip Connectors for ODDs & HDDs
EZ Grip Connectors for easy removal of the plugs from ODDs & HDDs.
Gold-plated the terminals minimize power loss by reducing contact resistance.
All power cables are sleeved for easy cable management and improved air circulation inside
the computer case.
Multiple Safety Features
Over-Voltage Protection, Over-Current Protection, Short-Circuit Protection, Under-Voltage Protection, Over-Temperature Protection.
Internal Blue LED
Blue LEDs are installed inside the power supply for cool aesthetics.
WEEE & RoHS
Complies to WEEE & RoHS Environmental Directives of Europe.
- WEEE : Waste Electrical and Electronic Regulations
- RoHS : Restriction of Hazardous Substances Regulations
International Safety and EMC Certifications
Output Power Cable Specifications
[Cable Lengths & Connector Names]
[Using the Multi-Connector (ZM-DC1)]
Electrical & Physical Characteristics
AC Input Range
100VAC ~ 240VAC ±10% DC OUTPUT
Frequency 47Hz~63Hz Output V. Output Load
AC Input Current
(Rated) 115VAC 10A Imin Imax Ipeak
230VAC 5A +3.3V 0.8A 24A
PFC Type Active PFC +5V 0.3A 24A
Power Factor 99% Maximum
+12V1 0A 16A 504W
(@ Cold start
at 25°C) 115VAC 60A
+12V2 0A 16A
230VAC 100A +12V3 1A 16A
Efficiency 84% Maximum @230VAC, Full&Typical load
+12V4 1A 16A
Output V. Regulation Range
Load -12V 0.0A 0.5A 18.5W
+3.3V ±5% +3.14V~+3.47V
0.0A 2.5A 3.5A
+5V ±5% +4.75V~+5.25V Protection Features
+12V1 ±5% +11.4V~+12.6V Over Voltage Protection(OVP)
+12V2 ±5% +11.4V~+12.6V Over Current Protection(OCP)
+12V3 ±5% +11.4V~+12.6V Short Circuit Protection(SCP)
+12V4 ±5% +11.4V~+12.6V Over Temperature Protection(OTP)
-12V ±10% -10.8V ~-13.0V Under Voltage Protection(UVP)
+5VSB ±5% +4.75V~+5.25V Ambient Temperature
& Noise Output V. Specification At Full
Load Operation 0°C ~ +50°C
+3.3V 100mV Storage -20°C ~ +80°C
+5V 100mV Ambient Humidily
+12V1 200mV Operation 5%RH ~ 95%RH
+12V2 200mV Storage 5%RH ~ 95%RH
+12V3 200mV Dimensions
+12V4 200mV 150(L) X 165(W) X 86(H) mm
To create a true noise-free computer, Zalman’s Quiet CPU Cooler, Quiet VGA Cooler, Heatpipe HDD Cooler,
Fanless Northbridge Cooler, and Noiseless Case Fan should be used together with this product.
1. Plugging the main power connector P1 into the motherboard while the product is connected to the AC power
source may result in damage to the motherboard.
2. Do not insert the DC output connectors into devices with excessive force as the shape of the connector was
designed to prevent incorrect insertion.
3. If the Power On light fails to light up when the main power button is pressed after completing the installation
procedure, then some devices may be plugged in incorrectly or the motherboard may be faulty.