ATX Zalman 360W Quiet Power Supply (ZM360B-APS)
This power supply boasts a 120mm ultra quiet fan, two PCI-Ex connectors (SLI and Crossfire™ compatible), both 20 and 24 pin motherboard compatibility,
gold-plated terminals and Easy-grip power connectors. In addition, the product is fully WEEE and RoHS compliant. This means that it meets new EU
legislation which restricts the amount of toxic substances used during manufacture, so it is better for both you and the environment too!
This power supply boasts a 120mm ultra quiet fan, two PCI-Ex connectors (SLI and Crossfire™ compatible), both 20 and 24 pin motherboard compatibility,
gold-plated terminals and Easy-grip power connectors. In addition, the product is fully WEEE and RoHS compliant. This means that it meets new EU
legislation which restricts the amount of toxic substances used during manufacture, so it is better for both you and the environment too!
The graph shows that the ZM360B-APS in "Noiseless" or "Silent" mode can operate when the power supply’s internal temperature is kept below 45°C. This
information is in compliance with the two Revision of ISO7779, an international standard for noise level measurement. Results may vary for different system
configuration and/or the test environment.
Specifications
Model number ZM360B-APS
Noise output 18-32db(A)
+3.3V maximum output current 22 A
+5V maximum output current 21 A
+12V1 maximum output current 11 A
+12V2 maximum output current 15 A
Combined maximum output +3.3V / +5V 150 W
ATX12V (4-pin) support Yes
EPS12V (8-pin) support Yes
20-pin ATX connector Yes
24-pin ATX connector Yes
PCI-E support (6-pin) Yes x2
Power conversion efficiency 80% minimum at full load
Mains input voltage 100-240 VAC, 47-63 Hz
Physical dimensions Standard ATX (86 x 150 x 140 mm)
Remote power on / off Yes
Fan speed control Thermal, maximum speed limited
Number of floppy drive connectors 2
Number of hard drive connectors 4
SATA connectors 2
Over voltage protection Yes, on all outputs
Short circuit protection Yes, on all outputs
EMC, safety approvals CE, CB, MIC
+5VSB maximum standby current 2.5 A
Monitor pass-through power socket No
Master power on/off switch Yes
Acoustic noise level (see graph above) 20 - 31 dB(A)
Mains input voltage selection Auto-range
Length of motherboard power cable 55 cm (approx)
information is in compliance with the two Revision of ISO7779, an international standard for noise level measurement. Results may vary for different system
configuration and/or the test environment.
Specifications
Model number ZM360B-APS
Noise output 18-32db(A)
+3.3V maximum output current 22 A
+5V maximum output current 21 A
+12V1 maximum output current 11 A
+12V2 maximum output current 15 A
Combined maximum output +3.3V / +5V 150 W
ATX12V (4-pin) support Yes
EPS12V (8-pin) support Yes
20-pin ATX connector Yes
24-pin ATX connector Yes
PCI-E support (6-pin) Yes x2
Power conversion efficiency 80% minimum at full load
Mains input voltage 100-240 VAC, 47-63 Hz
Physical dimensions Standard ATX (86 x 150 x 140 mm)
Remote power on / off Yes
Fan speed control Thermal, maximum speed limited
Number of floppy drive connectors 2
Number of hard drive connectors 4
SATA connectors 2
Over voltage protection Yes, on all outputs
Short circuit protection Yes, on all outputs
EMC, safety approvals CE, CB, MIC
+5VSB maximum standby current 2.5 A
Monitor pass-through power socket No
Master power on/off switch Yes
Acoustic noise level (see graph above) 20 - 31 dB(A)
Mains input voltage selection Auto-range
Length of motherboard power cable 55 cm (approx)
- Included
Components
One Power Supply
One Multi-connector for Fan (ZM-MC1)
One S-ATA power convert cable
One PCI Express VGA SLI sub-Cable for power
conversion
One Power Cord for AC Power Source
One User Manual
Zalman Cable Tie
CNPS (Computer Noise Prevention System) with Auto
Control Cooling NMB MAT Fan
One Power Supply
One Multi-connector for Fan (ZM-MC1)
One S-ATA power convert cable
One PCI Express VGA SLI sub-Cable for power
conversion
One Power Cord for AC Power Source
One User Manual
Zalman Cable Tie
CNPS (Computer Noise Prevention System) with Auto
Control Cooling NMB MAT Fan
Using the Multi-Connector (ZM-MC1)
How to Use:
The Muti-connector, included free in every Zalman power supply, is used to supply +5V or +12V power to any additional fans that a user may wish to install.
Connect it to the power supply's output connector (P9) and simply attach the fans to the 3-pin connectors at the other end.
How to Use:
The Muti-connector, included free in every Zalman power supply, is used to supply +5V or +12V power to any additional fans that a user may wish to install.
Connect it to the power supply's output connector (P9) and simply attach the fans to the 3-pin connectors at the other end.
Certified with International Safety Approvals & EMC Standards
[Noise Level (dB) Changes In relations to Power Supply's Internal Temperature]
ATX Zalman 360W Quiet Power Supply (ZM360B-APS)
 |
||||||||||
 |
 |
 |
||||||||
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|