Thermalright HR-07 Memory Module RAM Cooler
DDR, DDR2
Features
Double heatpipes to double heatsinks for fast and efficient cooling
Proprietary through holes on every fin for efficient ventilation in passive mode
Vast compatibility across multiple types of memories
No tools needed for an easy installation
Optional fan installation for even better cooling results
Supports DualChannel Memory setup
Technical Spec
Dimension:
L150 x W27 x H86 mm (Heatsink Only)
Weight:
150g (Heatsink Only)
Recommended Fan
70mm ,80mm ,92mm Fan
Compatibility
DDR1 DDR2 Single Sided Memory Module&Duble Sided Memory Module
(for Mother Board Memory Slot “Dimm Slot 1&3 ” “Dimm Slot 2&4” DualChannel)
Important Note: In order to install HR-07, you will have to remove the heat spreader on your memory module. However, Thermalright is not responsible for
any problems or damages that may occur during the removal of memory heat spreader. Users will be at their own risk. If you are not sure or do not know
how to remove/uninstall your heat spreader, please contact your memory manufacturer for instructions.
DDR, DDR2
Features
Double heatpipes to double heatsinks for fast and efficient cooling
Proprietary through holes on every fin for efficient ventilation in passive mode
Vast compatibility across multiple types of memories
No tools needed for an easy installation
Optional fan installation for even better cooling results
Supports DualChannel Memory setup
Technical Spec
Dimension:
L150 x W27 x H86 mm (Heatsink Only)
Weight:
150g (Heatsink Only)
Recommended Fan
70mm ,80mm ,92mm Fan
Compatibility
DDR1 DDR2 Single Sided Memory Module&Duble Sided Memory Module
(for Mother Board Memory Slot “Dimm Slot 1&3 ” “Dimm Slot 2&4” DualChannel)
Important Note: In order to install HR-07, you will have to remove the heat spreader on your memory module. However, Thermalright is not responsible for
any problems or damages that may occur during the removal of memory heat spreader. Users will be at their own risk. If you are not sure or do not know
how to remove/uninstall your heat spreader, please contact your memory manufacturer for instructions.
Thermalright HR-07 Memory Module RAM Cooler
Important Note:
When using dual channel, your motherboard configuration must be slots 1 & 3 or 2 & 4, using two HR-07's will not be physically compatible in dual channel
mode running side by side 1 & 2, 3 & 4 (as illustrated in the picture below).
When using dual channel, your motherboard configuration must be slots 1 & 3 or 2 & 4, using two HR-07's will not be physically compatible in dual channel
mode running side by side 1 & 2, 3 & 4 (as illustrated in the picture below).
Product order page - Order button located below
