NMB Thermally Controled Sensor Fan 3612KL-04W-B66 - 7g538,
NMB Dell Computer Fan
Specifications:
92x92x32mm, 25.0 CFM @ 1400 RPM, 17 dB, 1.25w .68 Startup Amperage, 12v DC, 3 pin connector with rpm output. Specifications listed are constant from
0 to 25°C. Also known as Dell part # 7J639. Cable length is approximately 7.5 inches.
Maximum Output Specifications:
When temperature is 55°C, specifications are 69.91 CFM @ 3800 RPM, 43.5 dB, 5.64w.
Additional notes:
The connector on this fan is not a standardized 3-pin header. However it is wired correctly and will work properly in normal 3-pin headers, as shown in the
following image Below.
Owners of Dell PCs
should inspect their old fan to be sure it is wired, as shown below from left to right, Black, Red, White. If it is Black, White, and Red instead, you will need to
perform a very simple modification to the Red and White pins to swap their places in the housing.
Made especially for Dell PCs and previously unavailable at reasonable prices, Acoustic PC has acquired this special thermal controlled 92x32mm fan made
by NMB.
Each 3612KL-04W-B66 has an integrated blue thermistor at the fan hub and helps eliminate unnecessary dangling wires in your case. As the temperatures
it detects increase, the 3612KL's RPM will raise to compensate and dissipate unwanted heat from your PC.
Other Dell PC owners have already discovered this little gem and saved themselves time and money by sourcing Acoustic PC for this product.
Notes: FAN 92 X 32MM 12V P4 DATECH 9232-12HBTL-2 DC 12V 0.70A DC BRUSHLESS
Compatible Models for Dell DP/N 7G538, 07G538 , 3612KL-04W-B66
Examples of Compatible Modles
Dimension 4300, Dimension 4550, Dimension 8200, Dimension 8250, Dimension 8300, OptiPlex GX240, PowerEdge 400SC
This amazing fan can also be used non dell computers and cpu heatsinks that fit a 92mm size.
Specifications:
92x92x32mm, 25.0 CFM @ 1400 RPM, 17 dB, 1.25w .68 Startup Amperage, 12v DC, 3 pin connector with rpm output. Specifications listed are constant from
0 to 25°C. Also known as Dell part # 7J639. Cable length is approximately 7.5 inches.
Maximum Output Specifications:
When temperature is 55°C, specifications are 69.91 CFM @ 3800 RPM, 43.5 dB, 5.64w.
Additional notes:
The connector on this fan is not a standardized 3-pin header. However it is wired correctly and will work properly in normal 3-pin headers, as shown in the
following image Below.
Owners of Dell PCs
should inspect their old fan to be sure it is wired, as shown below from left to right, Black, Red, White. If it is Black, White, and Red instead, you will need to
perform a very simple modification to the Red and White pins to swap their places in the housing.
Made especially for Dell PCs and previously unavailable at reasonable prices, Acoustic PC has acquired this special thermal controlled 92x32mm fan made
by NMB.
Each 3612KL-04W-B66 has an integrated blue thermistor at the fan hub and helps eliminate unnecessary dangling wires in your case. As the temperatures
it detects increase, the 3612KL's RPM will raise to compensate and dissipate unwanted heat from your PC.
Other Dell PC owners have already discovered this little gem and saved themselves time and money by sourcing Acoustic PC for this product.
Notes: FAN 92 X 32MM 12V P4 DATECH 9232-12HBTL-2 DC 12V 0.70A DC BRUSHLESS
Compatible Models for Dell DP/N 7G538, 07G538 , 3612KL-04W-B66
Examples of Compatible Modles
Dimension 4300, Dimension 4550, Dimension 8200, Dimension 8250, Dimension 8300, OptiPlex GX240, PowerEdge 400SC
This amazing fan can also be used non dell computers and cpu heatsinks that fit a 92mm size.
Product order page - Order button located below
