Feser TFC X-Changer Dual Fan Radiator - 240 Dual 120mm Fan Radiator Kit
Only the best materials are used for these radiators. The fins and water channels consist of high-grade copper (e-Cu). The water chambers consist of a
brass alloy. The layer of the black paint remains very thin, thus optimizing the heat-air transfer.
Dimensions: 11.38" x 4.84" x 2.44" LxWxH (289x123x62mm)
Copper Water Channels and Fins
Brass Water Chambers
Black Finish (5µm)
Mounting Screws for Case (8)
Mounting Screws for Fan (8)
Fan Spacing = 15mm
Silicon Pads (2)
Bleed Valve Screw
Stamped TFC – Xchanger Logo
Serial Number with Holographic Sticker
Sealed in VCI Bag - 5 Year corrosion protection
3 Year Warranty
Compatible with all available watercooling systems
The newly developed technology and patented design brings you double the cooling power to your system. Better materials, the newest technology and a
cool design prove to be an outstanding product.
NOISELESS - SILENT OPERATION
By using larger spacing between the copper fins the air flow rate is increased improving heat transfer. This allow allows the use or fans at a lower speed.
The lower the speed, the lower the noise level.
The radiators are especially designed to run with a High Flow system configuration. High Flow Systems are recommended to maximize your heat dissipation.
MAXIMUM SYSTEM COMPATIBILITY
The radiator inlet and outlet ports are G1/4” BSPP threaded allowing multiple fitting options. The X-CHANGER can replace any previous radiator used in a
PERFECT HEAT TRANSMISSION
The water channels and fins are made out of pure copper allowing for maximum transfer of heat out of the water.
INSTALLATION - EASY OF USE
Enough srews are provided to install the radiator properly. The radiator position (vertical / horizontal) will not effect the cooling performance.
Due to the ability of using low speed fans, and less water resistance for the pump, the operating system reduces energy consumption.
Feser TFC X-Changer Dual 120mm Fan Radiator