Quiet PC Accessories AFM02 Ultra Soft Quiet Computer Fan Mounts
Quiet Fan Mounting Products
In the name of silence we present to you this NEW high quality product.
Acousti Ultra-Soft Arrowhead Fan Mounts 8 included per pack enough for 2 Fans.
Ultra-soft fan mounts - designed & produced by Acousti Products 'from the drawing-board'. These fan mounts are an easy to fit, cost effective solution
to tackle PC fan vibration noise! Each pack is supplied with eight fan mounts, enough for 2 case fans.
Why AcoustiProducts ArrowHead Fan Mounts
Theye are ruly 'ultra-soft' & flexible - these mounts are designed to help reduce the transmission of fan motor vibration... helping to eliminate every last dB of
Designed to fit the vast majority of fans and PC cases
Quick & easy to fit as a 'no-vibration' alternative to fan screws. These mounts do not require any case modifications
Observe this example of a quick and easy instalation:
Detail size and Dimenions:
Ultra Soft Fan Mounts Fit FLANGE Type Moldings !
The more common Flange type fans ( Shown on the left ) " Do not have a tunnel " Connecting the mounting holes like the rib eye Type 2
Fans. Flange type desighn is the most common type of fan moulding used in PC's & Servers
Help to eliminate every last dB of PC noise by reducing the noise generated by fan vibrations!
Features & Benefits
Effective Fan Noise Reduction - truly 'ultra-soft', these mounts effectively decouple and absorb unwanted fan vibrations
Universal Design - designed to fit the vast majority of fans and PC cases (unlike other mounts available!)
Quick & Easy to fit - no case modifications required!
Generous quantities - enough in a Retail Pack for two fans, enough in an OEM pack for 25 fans!
"...most of the resonant buzz was eliminated. This indicates that the fan mounts were doing their job effectively." [silentpcreview.com]
This Retail Pack contains 8 anti-vibration mounts - enough to fit 2 fans.
AFM02 Ultra-Soft Mount Design
AFM02 Fan Mount Design. The fan mount has been designed with smoothed corners to prevent the propagation of cracks when stretched. When in position,
the fan is held 1.25mm away from the case side - this is just enough to allow free movement of the fan and effectively absorb vibrations, but not too much to
cause excessive air pressure loss around the fan.
How soft is ULTRA-SOFT? These are the SOFTEST mounts available!
For example, elongation is over 100%.
Why are Fan Mounts Necessary?
Vibration from fan motors can travel into a PC case and become amplified when a fan is screwed tightly to the chassis. This unwanted noise is 'vibrational' or
'secondary', and it is an issue if you wish to build a very quiet or virtually silent PC.
These mounts have been designed & uniquely produced by Acousti Products 'from the drawing-board' specifically to tackle fan-induced vibrational noise!
Ultra-Soft Fan Mounts are a 'no-vibration' alternative to standard fan screws or hard plastic push pins.
To prevent the transmission of vibrations from a motor (such as a fan motor), the vibrating part needs to be decoupled (or disengaged) from the chassis or
case, and the vibrations need to be damped (that is, attenuated). We have selected a ultra-soft silicone polymer that effectively decouples the fan from the
case, and also attenuates unwanted vibration.
The 3-dimensional shape of a fan mount is intimately related to the mount material. A fan mount must be soft enough to be effective but also designed to
securely hold a fan in position. Acousti Products have designed both the shape and materials together to give a widely compatible fan mount that is also the
very softest and most effective available!
Why are these Mounts any better than Others?
We have chosen an ultra-soft silicone polymer because it is softer and more chemically stable than cheaper and inferior alternatives like rubber or EPDM.
Cheaper alternatives can leach oils and tend to more readily degrade over time - they also tend to be more reactive with some plastics (wires etc.) than
silicone. Silicone is non-toxic, more chemically stable, and can also tolerate higher temperatures - so it is a superior material for this particular use.
AFM02B - Technical Specifications
Designed to fit Flange Type fans (see image right)
Range of Fan Mounting Holes: 4.0 - 5.25mm diameter
Range of Case Mounting Holes: 4.0 - 5.5mm diameter
Suitable for fans up to 120x120x38mm (max. weight 325g)
Length: 26mm, Largest Diameter: 8.0mm
Max. Elongation: >100%
Colour: Matt Black
Material: Ultra-Soft Silicone Dampening Polymer
Normal Operating Temperature Range: (-)20°C to (+)70°C
Pack Weight: 15g
AFM02 Ultra-Soft Fan Mounts fit FLANGE TYPE fan moldings!
8 ArrowHead Fan Mounts Included good for two fans.
For the more uncommon type rib eye molding,
We recomend GEL MOUNTS
Acousti Products - AFM02 Ultra Soft Arrowhead Quiet Computer Fan Mounts
|Why not spare your hearing with Acoustic PC’s Quiet Computer Cooling and Soundproofing
Solutions. Acoustic PC Stocks Quiet Computer Parts. Quiet PC Fans, Quiet CPU Coolers, Quiet
Power Supply, Quiet Computer Cases, PC Sound Dampening insulation, Ant-vibration Noise
Reduction materials such as Silicone Fan Mounts, Sorbothane Feet for Ultra Low noise PC's. We
also sell Silent PC Hardware components and Gaming products such as Fanless Silent Video
cards, SSD Drives, Professional Gaming peripherals for serious Gamers. Audio products & more.