Quiet PC Accessoies - Acousti Products AcoustiFan Gasket - Quiet Computer Fan Gasket
Anti-vibration ULTRA Soft Silicone Acousti products Quiet Fan Gaskets for Computer Case Fans
Acousti Products Fan Gaskets are simply the best read why!
* Reduces Primary & Secondary Vibrational Noise From PC Cooling Fans.
* Super Soft Silicone Composite
* Super Thick: 2.5mm
* Super Soft: 40 Shore Hardness.
As Always Acoustic PC is Dedicated To Bring You The Best Quality Products From Around The World AcoustiFan Fan Gaskets Are Simply The Best & As A
Result Do What There Suppose To Do.
1) Fit the fan gasket onto the outside of the fan housing (it will stay on the fan)
Position the fan and gasket together against the inside of the case, so that the four mounting holes in the fan and gasket line up to the mounting holes in the case
2) Locate the four silicone washers and screws, and fit the washers against the case side, each secured by a screw.
3) Tighten the screws enough to very slightly compress the silicone rubber. Do not over-tighten.
Effective? - Yes, these are simply the most effective yet!
Why are these silicone fan gaskets especially effective? Because we have not held back on the silicone thickness and the silicone material softness. All gaskets
are 2.5mm thick (not just 1mm like alternatives), and Shore A 40 (a great deal softer than others we have tested). We are confident that these two factors make
these gaskets more effective than any other models available.
Operating Temperature: (-)20 - (+)70°C
Softness: Shore A 40° ±5
Material: Translucent Silicon Rubber
Gasket Thickness: 2.5mm
Recommended Compression: 5% of height
What is Shore Hardness?
The hardness testing of plastics and rubbers is most commonly measured by the Shore (Durometer) test or Rockwell hardness test. Both methods measure the
resistance of plastics toward indentation and provide an empirical hardness value.
Shore Hardness (using either the Shore A or Shore D scale), is the preferred method for rubbers/elastomers. The Shore A scale is used for 'softer' materials
like silicone rubbers, while the Shore D scale is used for 'harder' materials.
The Shore hardness is measured with an apparatus known as a Durometer and consequently is also known as 'Durometer hardness'. The hardness value is
determined by the penetration of the Durometer indenter foot into the sample. A 'softer' material will have a lower Shore value than a 'harder' material.
Silicone fan gaskets are truly the ultimate in fan noise reduction, because they perform two important tasks:
Help to 'seal' the small gap between the fan and the casing/enclosure wall. This improves the efficiency of the fan, by reducing feedback airflow and therefore
air pressure losses, and
Help to absorb the vibration that otherwise would be transmitted from the fan into the case chassis and case housing.
Other advantages include:
Compatible with virtually all case cooling fans
Supplied with screws and silicone washers
Quick and very easy to fit (these gaskets 'hold onto' the fan whilst fitting them due to a small lip in the gasket design)
Quiet PC Accessories Acousti Products Quiet Computer Fan Gasket
Available For 120mm, 92mm, 80mm, 70mm and 60mm, Fans Choose Size Down Below